AirVerify™ is VerifiClean's proprietary real-time air quality testing system — the only on-site bioaerosol detection platform deployed during residential and commercial duct cleaning in New Mexico. It delivers court-admissible, timestamped before-and-after data in minutes, not days.
Traditional lab-based spore trap testing measures one parameter at one moment in time. AirVerify™ monitors six parameters simultaneously, continuously, in real time — while the technician works.
Cladosporium, Aspergillus, Penicillium, Stachybotrys
Total viable count including Legionella-risk species
Formaldehyde, benzene, toluene, xylene, and 200+ compounds
Fine and coarse particulate matter — dust, debris, combustion
Carbon dioxide as a proxy for ventilation adequacy
Moisture levels that predict mold growth risk
| Feature | AirVerify™ | Spore Trap (Lab) |
|---|---|---|
| Results turnaround | On-site, real-time (minutes) | 3–7 business days |
| Parameters measured | 6 simultaneous (mold, bacteria, VOCs, PM2.5, PM10, CO₂, RH) | Mold spores only |
| Continuous monitoring | Yes — readings every 30 seconds | No — single snapshot |
| Before/after comparison | Automatic — timestamped delta report | Requires two separate lab submissions |
| Court-admissible output | Yes — chain-of-custody timestamp | Lab report only (no chain of custody) |
| On-site interpretation | Yes — technician reads results live | No — requires lab analyst |
| Cost to homeowner | Included in every VerifiClean job | $150–$400 per sample, per lab |
| Detects VOCs | Yes | No |
| Detects bacteria | Yes | No |
| Detects particulate | Yes (PM2.5 & PM10) | No |
At the end of every VerifiClean job, you receive a printed and digitally signed AirVerify™ Certificate of Completion. It includes your pre-clean baseline readings, post-clean verification readings, the delta (improvement) for each parameter, and the technician's signature with timestamp.
This document is designed to be presented to insurers, property managers, healthcare compliance officers, and — when necessary — courts. It is not a marketing brochure. It is evidence.
Stop guessing. AirVerify™ gives you a number — before and after — so you can see exactly how much the air quality improved. Not a feeling. A fact.
Residential ServiceIICRC S520 requires clearance testing after mold remediation. AirVerify™ provides the on-site data your insurer and remediator need — same day.
Post-Remediation ServiceASHRAE 170 and Joint Commission EC.02.05.01 require documented IAQ management. AirVerify™ provides the timestamped evidence your compliance officer needs.
Healthcare ServiceShow tenants and insurers documented proof of air quality. AirVerify™ reports are designed to be attached to lease agreements and insurance claims.
Commercial ServiceAfter a wildfire event, VOC and particulate contamination in ductwork can persist for months. AirVerify™ detects what you can't smell and proves when it's gone.
Wildfire Smoke ArticleChain-of-custody AirVerify™ data has been used in NM property damage litigation. Timestamped, signed, and court-admissible. No other duct cleaning company offers this.
Forensic DocumentationAirVerify™ is VerifiClean's proprietary brand name for the real-time bioaerosol detection platform we deploy on every job. The underlying detection technology uses the same laser-particle-counting and fluorescence-based bioaerosol detection principles used in clinical and research settings.
A full baseline reading takes approximately 10–15 minutes. The device samples continuously, so by the time the pre-clean inspection is complete, we already have a statistically valid baseline. The post-clean verification reading is taken immediately after cleaning is finished — no waiting.
Yes. Every customer receives a printed copy at job completion and a digital PDF sent to their email. The report includes a QR code linking to the permanent digital record, which can be shared with insurers, property managers, or attorneys.
Yes. AirVerify™ reports have been accepted by major property insurers operating in New Mexico as documentation of pre- and post-remediation air quality. The timestamped, chain-of-custody format meets the documentation standards required for most residential and commercial claims.
No. VerifiClean is the only duct cleaning company in New Mexico currently deploying AirVerify™ real-time air quality testing on every job. Other companies may offer optional add-on testing, but none include it as a standard part of every service.
The AirVerify™ system takes a new reading every 30 seconds and displays it on a tablet screen that the customer can watch during the job. You see the mold spore count, VOC levels, and particulate readings change in real time as the cleaning progresses. There is no waiting for a lab to process samples.
Book a free pre-assessment and watch your air quality data in real time — before we clean a single duct.